| Leg Length | : | 2-3/8 in |
| Material | : | Polyethylene |
RAUTACKER™ 3D foam staples are used when installing RAUPEX® pipe on rigid foam board insulation in radiant heating and snow and ice melting applications. Extruded polystyrene foam board is recommended. The polyethylene (PE) staples with retention barbs are supplied in magazines of 25 staples. The 1-3/8 in staple is for use with minimum 1 in THK insulation. The 2-3/8 in staple is for use with minimum 1-1/2 in THK insulation. RAUTACKER™ 3D foam 1-3/8 in staples work with 3/8 in, 1/2 in and 5/8 in pipe. RAUTACKER™ 2 in and 2-3/8 in. Staples can be used with any pipe diameter. RAUTACKER™ 2-3/8 in staples are required for 3/4 in pipe. Typically, one staple is required every 3 ft on straight runs of pipe with an additional staple in the middle of bends. RAUTACKER™ 3D foam staples are installed from a standing position using the RAUTACKER™ 3D stapler tool. This lightweight tool can be loaded with 120 staples at a time. Follow all published installation instructions.
Rehau® 3D Foam Staple, 2-3/8 in Leg Length, Polyethylene